Skip to main content

Cleaning Shower Tray Sealant/Mastic

Revive your Shower Sealant

In this short life hack I am going to demonstrate how you can clean your shower tray sealant/mastic without having to remove and re-seal at a very low cost. The whole process should take around 12 hours, however you will only be working for around 10 minutes! This is such a simple way and cost effective way of reviving your sealant.

This blog has not been sponsored in any way. The products I have shared are the ones that I have used and preferred.


Here goes……..

Before






Step 1 – Items Required

1. The cheapest household bleach you can find! TescoThick Bleach Citrus 750Ml - Tesco Groceries
2. Rubber/disposable gloves (as you are dealing with bleach) Tesco Dishwashing Rubber Gloves Medium - Tesco Groceries
3. Eye protection (prevent bleach getting in your eyes) Site 2101 Origin Clear Lens Safety Specs | Safety Glasses | Screwfix.com
4. Old clothes (I have ruined several tee-shirts doing this!)
5. Cheap kitchen roll (lots of) Springforce Jumbo Kitchen Towel - Tesco Groceries
6. Plastic bag

Grand Total - £4.29



Step 2 – Treat the Affected Area

1. Ensure that you have all the protective gear on!
2. Pour plenty of bleach on the affected area (or you can do the entire shower tray)
3. When the sealant is soaked in bleach, tear off the kitchen roll the length of the affected area.
4. Force the kitchen roll onto the sealant ensuring that the bleach and kitchen roll have stuck together
5. Pour more bleach over the kitchen roll ensuring that it is soaked in bleach
6. Remove safety gear and leave for 12 hours!



Step 3 – Remove the Kitchen Roll After 12 Hours

1. Put safety gear back on!
2. Remove all the kitchen roll and place in a plastic bag for disposal
3. Use the shower to hose the affected area and give the shower tray a good clean
4. Your shower tray should now be spotless!



Here is a YouTube Video from Malcom Peill demonstrating a similar technique (3.7m views).

How To Remove Mold Mould From Silicone Sealant In Bathroom Shower - YouTube







Please leave any comments below. Thanks for reading










Comments

  1. Hi Brian - Blog content looks great - really handy

    ReplyDelete
  2. Good on ya right for that u can come do ours 🤣🤣🤣🤣

    ReplyDelete
  3. Hi Brian, thanks for tips. Looking forward to more handy tips. Easy instructions to follow with pictures too. Great idea,. Thanks.

    ReplyDelete
  4. Just wondering Brian if you’ve tried mould and mildew cleaner on mould I have a wet room the floor gets mould on it at times and this takes it all off not tried it on sealant though. Regards Mgt

    ReplyDelete
    Replies
    1. Thanks for your reply. I have tried loads of things and some work well. I find this way is the cheapest and easiest and really does remove all mild.

      Delete
  5. Looks vood Brian. Will give it a try

    ReplyDelete

Post a Comment

Popular posts from this blog

Deck Oil Vs Deck Stain?

What a good question this is!  Over the years I have used Decking stain on my now 19 year old, 40 square metre deck.  This year (2021) my deck has looked really old and in need of attention.  This is due to several reasons which include two really hard winters and the fact that I failed to treat the deck last year (2020) due to lack of products caused by the Pandemic. After reading several posts and watching several YouTube channels I decided to opt for the Decking Oil.  Just to let you know I am not being sponsored for any of the products below.  These are the products and ranges I personally use. After exploring the reviews of each of the products, I chose Screwfix's No Nonsense Decking Oil (this is a range I use frequently as it is great value for money and does exactly what it says on the tin....sorry for using Ronseal's phrase!).  £24.99 for 5 litres (sometimes they have this on offer) The reason for opting for this was that the Deck Oil was that it wa...

Fix Bald Patches in Your Grass

Todays blog is about fixing bald patches in your grass.  I have an eight month old Cocker Spaniel who is causing yellow and bald spots in my lawn.  There are a few easy steps to fix this and is fairly inexpensive.   You could by some turf and cut out the affected area, however you need to replace a larger area and the grass may be a different colour.  Another reason I wouldn't use  turf for this is that it tends to dry out quickly and die off. This is what the affected areas looked like... I am not being sponsored for any of the products or by any of the businesses I mention during the blog. These are all products and businesses I use. Here is my preferred method 1. Stuff Required (all available from B&Q) Aerator (or anything for making holes in the affected area such as a gardening fork) £15 Small lawn rake or small fork £3 Small box of grass seed  £6.50 Pre turf & lawn seed fertiliser £6.11  Dirt from the garden (preferred) of a sma...